Danny Hinse's Camcorder Mount

There's been a lot of positive response to Tom Guy's camera mount for the GL1000, 1100, 1200, and 1500. The only problem was, it was designed to fit the earlier style engine bars on the GL1500 and left folks with the newer style wanting. Well, to the rescue comes Danny Hinse of East Millinocket, Maine. Danny was kind enough to send along some very detailed and instructive pictures of his mount for the newer bars.

So, without any further delays here they are. If you have any questions about the mount, you can contact Danny directly. You might also want to let Danny know what you think.

Camcorder Mount

The camera can be used while in route but extreme caution must be used. I also purchased a clear lens to go over my lens to protect from rocks and other debris. My camera doesn't take a screw-on lens, so I will be using good old duct tape to hold it in place. (Danny)


Note: I have left the images fairly large so you can see the details of Danny's design and how it works.

.... Camcorder Mount Picture #1

.... Camcorder Mount Picture #2

.... Camcorder Mount Picture #3

.... Camcorder Mount Picture #4

.... Camcorder Mount Picture #5